2022–2024 · Exam-focused route
Recent-paper exam route: 2022–2024
Prepare for marks in the latest papers supplied: 2022–2024, four papers across three actual exam years.
No 2025 or 2026 exam paper is present.
File prefixes are academic-year identifiers, not the exam date.
The two 2023 papers are kept distinct.
| Paper | Answers / source | Printed subquestions |
|---|---|---|
| 2024 PTE | Open all answers · 23ENGTY004.pdf | 19 |
| 2023 FT/PTD | Open all answers · 22ENGTY006.pdf | 18 |
| 2023 PTE | Open all answers · 22ENGTY033.pdf | 16 |
| 2022 FT/PTDR | Open all answers · 21ENGTY031.pdf | 18 |
Start here — learn only what you need for the next task
1.
Foundation checkpoint: units, equilibrium, load factors, stress × area, and reading supports.
Use Introduction; then attempt the recognition drills below.
2.
Secure Section A: work through 2023 FT/PTD floor beams, then close it and attempt 2024 AQ1.
Explain every reaction transfer before calculating.
3.
Connections: compare the double bolted angles, splice, torsional weld group and web/flange weld bracket.
Then cover the 2023 PTE bolt tension/shear and welded-angle variants.
4.
Columns: contrast eccentric reactions and stiffness sharing with given end moments.
Keep elastic/plastic and first-order/amplified quantities separate.
5.
LTB: start with supported beam segments, then test transfer on the 2023 overhang.
Support identification and cantilever effective length are the main change.
6.
Independent and timed work: new transfer drills and timed route.
Re-do the first incorrect decision rather than memorising a final number.
Evidence-based priorities, not a prediction
All four recent papers use the same broad allocation.
Compulsory floor-beam calculations carry 36 marks.
Short theory carries 4 marks.
The optional families are connections, columns and unrestrained beams.
Each optional family carries 30 marks.
This is 520 offered marks across four papers, but only 400 would be answered.
Same-year papers do not count as extra years of evidence.
| Knowledge family | Observed in supplied recent papers | What to master for marks |
|---|---|---|
| Floor beams | 4/4 · 36 × 4 = 144 | Tributary width, reaction transfer, self-weight, section class, low-shear bending, imposed-load deflection. |
| Connections | 4/4 · 30 × 4 = 120 | Recognise bolt shear/bearing/tension and weld direct/torsional/couple models; recent papers vary the mechanism. |
| Columns | 4/4 · 30 × 4 = 120 | Read axes; classify; section interaction. Both buckling interactions; simple versus continuous model. |
| Unrestrained beams | 4/4 · 30 × 4 = 120 | Statics, signed SFD/BMD, restraint segments, quarter moments, effective length and table interpolation. |
| Short theory | 4/4 · 4 × 4 = 16 | Fire protection (2022, 2023 FT/PTD), corrosion (2023 PTE), rolled sections (2024). Keep all three short topics ready. |
Evidence: each paper cover and question pages 2–6.
The question-by-question official mark allocations are in the four answer navigators above.
Frequency here measures this small supplied set, not the probability of a future question.
Introduction — recent short theory
- 2024 PTE · Compulsory floor beams
- 2023 FT/PTD · 2023 AQ1 — floor beams and fire protection
- 2023 PTE · Compulsory floor beams
- 2022 FT/PTDR · 2022 AQ1 — floor beams and fire protection
Continue with the chapter’s tutorials and assignments only where they repair a weakness exposed by these papers.
Connections — all recent variants
- 2024 PTE · Connection part (a)
- 2024 PTE · Connection part (b)
- 2023 FT/PTD · 2023 FT/PTD BQ2(a) — double bolted angles
- 2023 FT/PTD · 2023 FT/PTD BQ2(b) — welded UB bracket
- 2023 PTE · Connection part (a)
- 2023 PTE · Connection part (b)
- 2022 FT/PTDR · 2022 BQ1(a) — double-cover bolted splice
- 2022 FT/PTDR · 2022 BQ1(b) — eccentric rectangular weld
Continue with the chapter’s tutorials and assignments only where they repair a weakness exposed by these papers.
Beams — floors and LTB
- 2024 PTE · Compulsory floor beams
- 2024 PTE · LTB beam
- 2023 FT/PTD · 2023 AQ1 — floor beams and fire protection
- 2023 FT/PTD · 2023 FT/PTD BQ4 — overhang and LTB
- 2023 PTE · Compulsory floor beams
- 2023 PTE · LTB beam
- 2022 FT/PTDR · 2022 AQ1 — floor beams and fire protection
- 2022 FT/PTDR · 2022 BQ3 — two point loads and LTB segments
Continue with the chapter’s tutorials and assignments only where they repair a weakness exposed by these papers.
Columns — both moment models
- 2024 PTE · Column check
- 2023 FT/PTD · 2023 BQ3 — column with biaxial bending
- 2023 PTE · Column check
- 2022 FT/PTDR · 2022 BQ2 — column with biaxial bending
Continue with the chapter’s tutorials and assignments only where they repair a weakness exposed by these papers.
Lower-priority reference practice
The twelve older exams now have full teaching answers at Older answers by chapter.
Keep 2022–2024 as the core revision route.
Older-only numerical layouts and separate web-bearing/web-buckling or frame-analysis topics are reference material unless a current task requires them.
This is a study-time choice, not a prediction that they cannot appear.