STEELWORK / CON4334
Worked examples

2024 BQ3: column class and all three combined-action checks

Diagrams, explanations and answers are presented in reading order. No playback or response is required.
All answers shownChinese–English terminology
Diagrams, explanations and answers are presented in reading order. No playback or response is required.

Answer all 30 marks of BQ3. Check 254×254×89 UC S355 with effective length 4m and factored compression 650kN. Applied clockwise-positive top/bottom moments: x-axis+75/+45kN·m; y-axis+65/−39kN·m. Amplification factors 1.1/1.1. The separately supplied amplified Mᴸᵀ is 96 kNm.

Original source: Pastpaper/23ENGTY004.pdf — p. 5.

A given value comes from the question or diagram.

A lookup value comes from the named table.

A calculated value follows from the working.

Each assumption is stated where the calculation needs it.

Known information, diagram labels and unknowns

Compression acts on the displaced shape

A compressed member moves away from its initial load line. Explain why the bending moment can increase.

The dashed line labelled Original marks the initial position. The tilted member creates the extra horizontal lever arm shown below.
The dashed line labelled Original marks the initial position. The tilted member creates the extra horizontal lever arm shown below.

Prediction, then explanation. At fixed axial force, a larger offset creates a larger additional moment. This can further increase the displacement.

Force acting through an offset forms a moment. Second-order analysis includes that changed geometry in equilibrium.

Madditional=PΔorPδM_{additional}=P\Delta\quad\text{or}\quad P\delta

P is axial force. Δ and δ are the relevant perpendicular displacements. Consistent force and length units give moment units.

Scope. Use the amplification or analysis method stated for the frame. Do not amplify an already amplified moment a second time.

Check and takeaway. Zero offset removes this additional moment in the ideal sketch. Real design may still require imperfections and code checks.

Restraints define the analysis model

Choose an analysis model that represents the actual joints, restraints and possible sway.

Braced pathPossible sway
The joint symbol describes permitted rotation. The frame arrows describe possible sideways movement. These are separate observations.

Prediction, then explanation. A joint that permits beam rotation does not automatically remove all column moment. Eccentric reactions may still bend the column.

First identify the joint behaviour. Next identify how horizontal forces reach the foundations. Then assess sway sensitivity using the course criterion.

Simple, continuous and semi-continuous construction describe joint modelling. Sway classification describes overall frame response.

Scope. The schematic does not establish restraint stiffness or a stability threshold. Use the stated data and classification rules.

Check and takeaway. An ideal straight frame may still require notional horizontal forces to represent imperfections under the applicable method.

Find which plate buckles first

Before using plastic bending resistance, check whether the flange and web can sustain the required stress distribution.

The short waves are local plate buckling. They differ from sideways movement of the whole member.
The short waves are local plate buckling. They differ from sideways movement of the whole member.

Prediction, then explanation. At fixed width, a thinner plate has a larger width-to-thickness ratio. Local buckling then becomes more restrictive.

Calculate the flange and web ratios separately. Compare each with the limits for its stress condition. The worse class governs.

ε=275/py\varepsilon=\sqrt{275/p_y}

py is the design yield strength in N/mm². ε is a dimensionless scale used in the supplied classification limits.

Scope. Pure bending and uniform compression use different web limits. Class 2 allows plastic resistance but not the Class 1 rotation capability.

Check and takeaway. A Class 1 web and Class 2 flange give a Class 2 section. Do not average the class numbers.

Apply the reasoning to this section’s data and conditions

Lookup: Data File p.11, exact row 254×254×89 UC.

Read the dimensions/local ratios table and the properties table separately.

The x–x axis crosses the web horizontally; y–y passes vertically through its centre in the table sketch.

PropertyValue and units
Flange/web/root-to-root web depthT=17.3mm、t=10.3mm、d=200.3mm。
Local slendernessbT=7.41、dt=19.4。
Radii (converted from cm)rx=11.2×10=112mm;ry=6.55×10=65.5mm。
AreaA=113cm2=11300mm2。
Elastic moduliZx=1096cm3;Zy=379cm3。
Plastic moduliSx=1224cm3;Sy=575cm3。
LTB parameters

u=0.85, x=14.5.

Both dimensionless

Why this method applies

Use the same mechanism: Compression acts on the displaced shape. At fixed axial force, a larger offset creates a larger additional moment. This can further increase the displacement.

Use the same mechanism: Find which plate buckles first. At fixed width, a thinner plate has a larger width-to-thickness ratio. Local buckling then becomes more restrictive.

Vertical bending can trigger sideways motion

A beam has enough local bending resistance. Check whether its compression flange can move sideways and twist.

The dashed straight line is the initial reference. The curved flange lines illustrate the labelled sideways movement and twist.
The dashed straight line is the initial reference. The curved flange lines illustrate the labelled sideways movement and twist.

Prediction, then explanation. Adding a valid lateral restraint shortens a stability segment. It need not change the beam’s vertical reaction or moment diagram.

Identify the compressed flange and effective restraints. Calculate the specified slenderness, read buckling strength and compare resistance with the segment demand.

λ=LE/ry,Mb=pbSx  (Class 1/2),mLTMmax≤Mb\lambda=L_E/r_y,\qquad M_b=p_bS_x\;\text{(Class 1/2)},\qquad m_{LT}M_{max}\le M_b

LE and ry use the same length unit. pb uses N/mm²; Sx uses mm³; Mb uses N·mm. mLT is dimensionless.

Scope. Use the specified section class, effective-length branch and loading condition. Load height alone does not prove a destabilizing case.

Check and takeaway. Removing a lateral restraint requires a new segment stability check. The old shorter-segment result cannot establish the longer segment’s adequacy.

Apply the reasoning to this section’s data and conditions

The three checks answer different questions.

Local classification determines the section resistance model.

Cross-section interaction checks yielding/local resistance; flexural and axial/LTB interactions check member instability.

Keep plastic versus elastic denominators and first-order versus amplified moments distinct.

The top has both listed maximum moment magnitudes, so those maxima coexist.

(a) Classify the column section — 4 printed marks

Use the same mechanism: Find which plate buckles first. At fixed width, a thinner plate has a larger width-to-thickness ratio. Local buckling then becomes more restrictive.

Apply the reasoning to this section’s data and conditions

Physical interpretation: A thin part can wrinkle first

A thin plate may wrinkle before the whole steel member reaches its intended resistance.

A thin part can wrinkle first — A thin plate may wrinkle before the whole steel member reaches its intended resistance.

Sketch, not to scale; use the original dimensions.

  1. Check flange and web slenderness using their own definitions.
  2. Compare each ratio with the correct class limits.
  3. The element with the more restrictive class determines the section class.

Remember: Bending limits and uniform-compression limits are different.

Related concept and full method

T=17.3mm; use the S355 thickness band to select py=345Nmm2. ε=275345=0.892805
Flange bT=7.41; Class 1 limit 9ε=8.035248; Class 2 limit 10ε=8.928054. Flange is Class 1.
Web stress parameter: r1=Fdtpy=650×1,000200.3×10.3×345Using 0≤r1≤1 is capped to give 0.913221. For any r1 in this range, the conservative Class 1 web limit is 40ε=35.712215. dt=19.4<35.712215. The web satisfies this stricter limit. Overall Class 1; use capped plastic section resistance.

The lecture’s Class 1 combined-stress web limit 80ε1+r1 cannot be below 40ε because r1≤1.

This check therefore avoids an unjustified plastic classification while remaining conservative.

The flange is checked independently.

Use the flange’s 9ε Class 1 bound and the conservative combined-compression web bound explained above.

The given compression affects web stress distribution but does not change the actual dimension ratios.

The result is Class 1.

Mechanism detailsWhy thin elements buckle locally1 concept · 3 source expressions

The complete mechanism is explained below.

Read each stage together with its stated conditions; playback and interaction are not required.

  1. The flange outstand and web have different widths, thicknesses and edge support conditions.
  2. A thinner plate can wrinkle locally before the complete member loses stability.
  3. Class 1 allows plastic rotation.

    Class 2 reaches plastic resistance.

    Class 3 reaches elastic resistance.

    Class 4 requires effective properties.

  4. Check every relevant compression element with the supplied limits and stress distribution.

    The deformation shown is qualitative.

(b) Cross-section capacity — 7 printed marks

A strong cross-section can belong to an unstable member

A column carries axial compression and bending. Explain why more than one check is required.

The three boxes name separate checks: Section, Flexural and LTB. The bottom caption explains that passing one does not pass the others.
The three boxes name separate checks: Section, Flexural and LTB. The bottom caption explains that passing one does not pass the others.

Prediction, then explanation. At fixed moments and resistances, increasing compression increases utilisation. A section pass cannot remove the length-dependent instability checks.

Separate cross-section, flexural-buckling and LTB interaction equations. Use each equation’s own denominators and first-order or amplified moments.

AgpyA_g p_y is a section axial resistance. AgpcA_g p_c is a member compression resistance. Elastic pyZp_y Z and prescribed McM_c are different bending denominators.

Scope. Preserve the course barred-moment definitions and Eq. 8.81 convention. Do not substitute plastic moduli into an elastic denominator.

Check and takeaway. Report each requested utilisation and the governing check. The largest properly calculated ratio identifies the closest limit.

Two simultaneous actions use one component

Check a component that carries shear and tension, or compression and bending, at the same time.

The bolt receives two labelled arrows: tension and shear. The caption requires both individual checks and the combined check.
The bolt receives two labelled arrows: tension and shear. The caption requires both individual checks and the combined check.

Prediction, then explanation. At fixed resistances, increasing one demand increases its utilisation. The permitted sum is not always one.

First apply the individual checks. Next use the exact combined equation and its definitions. Keep demands from the same load case.

FsPs+FtPnom≤1.4\frac{F_s}{P_s}+\frac{F_t}{P_{nom}}\le1.4

This is the course bolt interaction rule. Fs and Ft are bolt demands; Ps and Pnom are their specified resistance denominators.

Scope. The 1.4 limit and nominal tension denominator do not apply to column equations. Their limits and moment definitions are separate.

Check and takeaway. A sum above one can pass this bolt rule while still needing individual checks. A pass must name the actual equation used.

Use the same mechanism: Compression acts on the displaced shape. At fixed axial force, a larger offset creates a larger additional moment. This can further increase the displacement.

Apply the reasoning to this section’s data and conditions

Physical interpretation: The column needs more than one pass

A slice can be strong while the whole member still buckles.

The column needs more than one pass — A slice can be strong while the whole member still buckles.

Sketch, not to scale; use the original dimensions.

  1. Check cross-section compression plus bending.
  2. Then check the separate member-buckling expressions.
  3. Keep each moment, factor and resistance in its specified expression.

Remember: The three checks do not share interchangeable denominators.

Related concept and full method

At a cross section, compression and bending share the material.

Use amplified moments and capped plastic resistances.

The total must not exceed 1; all terms below are dimensionless.

Agpy=113×100×3451,000=3898.5kNMx,amp=1.1×75=82.5kN·mMy,amp=1.1×65=71.5kN·mMcx=min(345×12241,000,1.2×345×10961,000)=min(422.28,453.744)=422.28kN·mMcy=min(345×5751,000,1.2×345×3791,000)=min(198.375,156.906)=156.906kN·mSection interaction ratio: 6503898.5+82.5422.28+71.5156.906=0.817786Passes.

For this UC, the minor axis is governed by the 1.2pyZy cap.

Using only pySy would overestimate allowable minor-axis moment.

The denominator of the section axial-force term is gross squash resistance Agpy, not member compression resistance Pc.

Mechanism detailsA strong slice can belong to an unstable member3 concepts · 1 source expressions

The complete mechanism is explained below.

Read each stage together with its stated conditions; playback and interaction are not required.

  1. Combine axial compression and the two bending demands using the specified section resistances.
  2. The whole member adds effective-length and buckling-curve effects.
  3. This uses its own moment factor and bending resistance.

    It is not a copy of the section check.

  4. Elastic, plastic and buckling resistances are not interchangeable.

    Read the three original expressions and their first-order/amplified moments.

(c) Member buckling — 19 printed marks

Use the same mechanism: A strong cross-section can belong to an unstable member. At fixed moments and resistances, increasing compression increases utilisation. A section pass cannot remove the length-dependent instability checks.

Check buckling about both axes

Determine which buckling direction limits the compressed member.

Compare the outlines labelled Straight and Bowed. The dashed line beside Bowed marks its original straight reference.
Compare the outlines labelled Straight and Bowed. The dashed line beside Bowed marks its original straight reference.

Prediction, then explanation. At fixed radius, longer effective length raises slenderness. The supplied buckling curve generally gives lower compressive strength.

Calculate slenderness about each axis. Select each axis’s curve from section type and thickness. Then obtain and compare the two compressive resistances.

λx=LEx/rx,λy=LEy/ry,Pc=pcAg\lambda_x=L_{Ex}/r_x,\quad\lambda_y=L_{Ey}/r_y,\qquad P_c=p_cA_g

Effective lengths and radii use mm. pc is compressive strength in N/mm²; Ag is gross area in mm²; Pc is in N.

Scope. Do not select the governing axis using radius alone. Effective length and buckling curve can differ. A combined column also needs interaction checks.

Check and takeaway. A short-section yield resistance is not the same as long-member buckling resistance. Keep py and pc distinct.

Use the same mechanism: Vertical bending can trigger sideways motion. Adding a valid lateral restraint shortens a stability segment. It need not change the beam’s vertical reaction or moment diagram.

Apply the reasoning to this section’s data and conditions

Physical interpretation: Why a long column can fail before crushing

Push a long thin ruler from both ends: it may bow sideways first.

Why a long column can fail before crushing — Push a long thin ruler from both ends: it may bow sideways first.

Sketch, not to scale; use the original dimensions.

  1. Find effective length and radius of gyration for each axis.
  2. Calculate slenderness for both directions.
  3. Use the appropriate buckling curve before forming resistance.

Remember: Compare the final resistances; slenderness alone may not identify the controlling axis.

Related concept and full method

Physical interpretation: A beam can escape sideways

The compressed flange can move sideways while the section twists.

A beam can escape sideways — The compressed flange can move sideways while the section twists.

Sketch, not to scale; use the original dimensions.

  1. Divide the beam at effective lateral restraints.
  2. Use each segment’s effective length to obtain its buckling resistance.
  3. Compare that resistance with the segment’s equivalent moment demand.

Remember: A section bending check alone does not check lateral-torsional buckling.

Related concept and full method

First read the factors from the two separate moment-gradient tables.

The opposite-face convention makes internal β=−MbottomMtop for this clockwise-positive applied schedule.

βx=−4575=−0.600000Table 8.9: mx=0.6+0.2βx=0.480000βy=−(−39)65=0.600000Table 8.9: my=0.6+0.4βy=0.840000Table 8.4a: mLT=max(0.44,0.6+0.4βx)=0.440000

Use the major-axis end pattern for the LTB moment factor in this course solution.

Use the separate LTB moment magnitude specified by the paper.

Do not replace it with the largest amplified Mx simply because the values differ.

Table 8.7: hot-rolled H-section (UC), maximum thickness ≤40mm, about the x axis use curve b, about the y axis use curve c.

Use the Data File p.8 py=345Nmm2 column.

The two axes use different curves, so slenderness alone cannot identify the governing axis.

Given effective length: LEx=LEy=4000mmλx=4000112=35.714286λy=400065.5=61.068702x axis uses curve b: 35 gives 318,40 gives 310Nmm2. Interpolation fraction: 35.714286−3540−35=0.142857pc=318+0.142857×(310−318)=316.857143Nmm2y axis uses curve c: 60 gives 241,62 gives 236Nmm2. Interpolation fraction: 61.068702−6062−60=0.534351pc=241+0.534351×(236−241)=238.328244Nmm2Pcx=Apcx10=113×316.85714310=3580.485714kNPcy=113×238.32824410=2693.109160kNPc=min(Pcx,Pcy)=2693.109160kN

Member interaction uses elastic moment denominators pᵧZ, even when the cross-section check used plastic moduli.

Use amplified moments here.

Mex=345×10961,000=378.12kN·mMey=345×3791,000=130.755kN·mFPc+mxMx,ampMex+myMy,ampMey=6502693.109160+0.48×82.5378.12+0.84×71.5130.755=0.805418Passes.

Continuous/non-sway member: Class 1/2 gives βW=1.

Use the full u–v calculation with the stated effective length.

λ=LEry=400065.5=61.068702v=[1+0.05(λx)2]−14=[1+0.05(61.06870214.5)2]−14=0.853224λLT=uvλβW=0.85×0.853224×61.068702×1=44.289500

Read Data File p.5 Table 8.3a, pᵧ345 column:

40 gives 317,45 gives 302Nmm2. Interpolation fraction: 44.289500−4045−40=0.857900pb=317+0.857900×(302−317)=304.131499Nmm2Mb=pbSx=304.131499×12241,000=372.256955kN·m

Course Eq.8.81 uses first-order minor-axis moment in its last term.

Mᴸᵀ is the specified amplified major-axis value.

Do not amplify it twice.

The axial denominator is Pcy.

FPcy+mLTMLTMb+myMy,firstMey=6502693.109160+0.44×96372.256955+0.84×65130.755=0.772402Passes.

py=345Nmm2; Pcx=3580.486kN, Pcy=2693.109kN; Mcx=422.280kN·m, Mcy=156.906kN·m; Mb=372.257kN·m.

Interaction ratios: section 0.817786, flexural buckling 0.805418, axial force/LTB 0.772402.

All three requested strength checks pass.

Suggested method-credit checkpoints (inferred, not an official allocation): correct strength/curve choice.

Both slendernesses; interpolation; correct signed factors; elastic member denominators; u–v calculation.

Both interaction ratios and a conclusion.

Keep these operations visible.

A small rounding difference does not replace the need to show the method.

Mechanism detailsA strong slice can belong to an unstable member6 concepts · 16 source expressions

The complete mechanism is explained below.

Read each stage together with its stated conditions; playback and interaction are not required.

  1. Combine axial compression and the two bending demands using the specified section resistances.
  2. The whole member adds effective-length and buckling-curve effects.
  3. This uses its own moment factor and bending resistance.

    It is not a copy of the section check.

  4. Elastic, plastic and buckling resistances are not interchangeable.

    Read the three original expressions and their first-order/amplified moments.

Result and concise exam wording

Use the same mechanism: Compression acts on the displaced shape. At fixed axial force, a larger offset creates a larger additional moment. This can further increase the displacement.

Use the same mechanism: Vertical bending can trigger sideways motion. Adding a valid lateral restraint shortens a stability segment. It need not change the beam’s vertical reaction or moment diagram.

Use the same mechanism: Two simultaneous actions use one component. At fixed resistances, increasing one demand increases its utilisation. The permitted sum is not always one.

Apply the reasoning to this section’s data and conditions

(a) Class 1, pᵧ345. (b) amplifiedMx 82.5,My 71.5 kNm. (c) mx 0.480000,my 0.840000,mLT0.440000; givenMLT96 remains unchanged.

py=345Nmm2; Pcx=3580.486kN, Pcy=2693.109kN; Mcx=422.280kN·m, Mcy=156.906kN·m; Mb=372.257kN·m.

Interaction ratios: section 0.817786, flexural buckling 0.805418, axial force/LTB 0.772402.

All three requested strength checks pass.

Misconceptions and checks

Use the same mechanism: Compression acts on the displaced shape. At fixed axial force, a larger offset creates a larger additional moment. This can further increase the displacement.

Moment shape matters within one segment

Represent a nonuniform moment distribution in the applicable member-buckling equation.

The two diagrams have equal peaks. The left high-moment region is short; the right high-moment region extends across more of the segment.
The two diagrams have equal peaks. The left high-moment region is short; the right high-moment region extends across more of the segment.

Prediction, then explanation. Two segments can have equal peak moment but different distributions. Their equivalent moment factors can therefore differ.

Evaluate moments from the true whole-beam analysis at the required positions. Apply the exact table’s weights, signs and lower bound.

mLT is an LTB factor. mx and my belong to the specified flexural checks. They are not interchangeable.

Scope. Some rules use magnitudes; others require signed ordinates. A factor does not reduce the actual moment used in a local section check.

Check and takeaway. Measure quarter points from the segment start, not automatically from the beam’s left support.

Use the same mechanism: Vertical bending can trigger sideways motion. Adding a valid lateral restraint shortens a stability segment. It need not change the beam’s vertical reaction or moment diagram.

Apply the reasoning to this section’s data and conditions

  • Do not apply an additionalK to the given effective height.
  • Do not use the same end-moment factor formula for reversing flexural and LTB patterns.
  • Do not amplify Mᴸᵀ twice.
  • The final LTB minor-axis term uses the course first-order My.

    The flexural one uses amplifiedMy.

How the method transfers to a new variant

Use the same mechanism: Compression acts on the displaced shape. At fixed axial force, a larger offset creates a larger additional moment. This can further increase the displacement.

Use the same mechanism: Moment shape matters within one segment. Two segments can have equal peak moment but different distributions. Their equivalent moment factors can therefore differ.

Use the same mechanism: Vertical bending can trigger sideways motion. Adding a valid lateral restraint shortens a stability segment. It need not change the beam’s vertical reaction or moment diagram.

Apply the reasoning to this section’s data and conditions

  1. Read the sign convention and exact section row.
  2. Determine strength and class.
  3. Amplify each first-order moment once, preserving a separately given amplifiedMLT.
  4. Check the capped section resistances.
  5. Find both compression resistances and the signed moment factors.
  6. Complete flexural and axial/LTB interactions separately.

Prediction with explained answer

Use the same mechanism: Compression acts on the displaced shape. At fixed axial force, a larger offset creates a larger additional moment. This can further increase the displacement.

Use the same mechanism: Find which plate buckles first. At fixed width, a thinner plate has a larger width-to-thickness ratio. Local buckling then becomes more restrictive.

Use the same mechanism: Two simultaneous actions use one component. At fixed resistances, increasing one demand increases its utilisation. The permitted sum is not always one.

Apply the reasoning to this section’s data and conditions

Prediction and explained answer.

Invented variant: all first-order actions and the supplied amplifiedMᴸᵀ increase 10% proportionally while section, effective length and amplification factors remain unchanged.

What is the largest of the three new ratios?

Answer and reasoning

With the same class and moment ratios, resistances/factors stay unchanged and all interaction demands scale by 1.1.

The largest becomes 1.1×0.817786=0.899564.

It remains below 1.

Reconfirm classification after any changed axial load.

The conservative web check here still covers boundedr₁.

Mechanism detailsA strong slice can belong to an unstable member2 concepts · 1 source expressions

The complete mechanism is explained below.

Read each stage together with its stated conditions; playback and interaction are not required.

  1. Combine axial compression and the two bending demands using the specified section resistances.
  2. The whole member adds effective-length and buckling-curve effects.
  3. This uses its own moment factor and bending resistance.

    It is not a copy of the section check.

  4. Elastic, plastic and buckling resistances are not interchangeable.

    Read the three original expressions and their first-order/amplified moments.