STEELWORK / CON4334
Worked examples

2024 BQ3: column class and all three combined-action checks Section B · choose 2 of 3

Chinese–English terminology

Answer all 30 marks of BQ3. Check 254×254×89 UC S355 with effective length 4m and factored compression 650kN. Applied clockwise-positive top/bottom moments: x-axis+75/+45kN·m; y-axis+65/−39kN·m. Amplification factors 1.1/1.1. The separately supplied amplified Mᴸᵀ is 96 kNm.

Original question: paper, p. 5. Note: marks are as printed in the paper; the working is a teaching guide, not an official marking scheme.

Read the diagram and collect the data

Lookup: Data File p.11, exact row 254×254×89 UC. Read the dimensions/local ratios table and the properties table separately. The x–x axis crosses the web horizontally; y–y passes vertically through its centre in the table sketch.

PropertyValue and units
Flange/web/root-to-root web depthT=17.3mm、t=10.3mm、d=200.3mm。
Local slendernessbT=7.41、dt=19.4。
Radii (converted from cm)rx=11.2×10=112mm;ry=6.55×10=65.5mm。
AreaA=113cm2=11300mm2。
Elastic moduliZx=1096cm3;Zy=379cm3。
Plastic moduliSx=1224cm3;Sy=575cm3。
LTB parametersu=0.85, x=14.5; both dimensionless

Before calculating: recognition and strategy

The three checks answer different questions. Local classification determines the section resistance model. Cross-section interaction checks yielding/local resistance; flexural and axial/LTB interactions check member instability. Keep plastic versus elastic denominators and first-order versus amplified moments distinct. The top has both listed maximum moment magnitudes, so those maxima coexist.

(a) Classify the column section — 4 printed marks

Simple explanation: A thin part can wrinkle first

A thin plate may wrinkle before the whole steel member reaches its intended resistance.

A thin part can wrinkle first — A thin plate may wrinkle before the whole steel member reaches its intended resistance.
Sketch, not to scale; use the original dimensions.
  1. Check flange and web slenderness using their own definitions.
  2. Compare each ratio with the correct class limits.
  3. The less favourable element determines the section class.

Remember: Bending limits and uniform-compression limits are different.

Related concept and full method

T=17.3mm; use the S355 thickness band to select py=345Nmm2. ε=275345=0.892805
Flange bT=7.41; Class 1 limit 9ε=8.035248; Class 2 limit 10ε=8.928054. Flange is Class 1.
Web stress parameter: r1=Fdtpy=650×1,000200.3×10.3×345Using 0≤r1≤1 is capped to give 0.913221. For any r1 in this range, the conservative Class 1 web limit is 40ε=35.712215. dt=19.4<35.712215. The web satisfies this stricter limit. Overall Class 1; use capped plastic section resistance.

The lecture’s Class 1 web limit under combined compression and bending is 80ε1+r1\frac{80\varepsilon }{1+{r}_{1}}; because r1≤1{r}_{1}\leq 1, it is never below 40ε40\varepsilon. Here we simply use the stricter 40ε40\varepsilon, which is always on the safe side. The flange is checked separately.

Use the Class 1 limit 9ε9\varepsilon for the flange and 40ε40\varepsilon from the paragraph above for the web. The compression changes how stress is spread over the web, but not the section’s dimension ratios. The result is Class 1.

Animation labWhy thin elements buckle locally1 concept · 3 source expressions

Supplement to the original lesson. Enable JavaScript to play, step through calculations and rotate 3D models. The following explanation remains readable offline.

  1. The flange outstand and web have different widths, thicknesses and edge support conditions.
  2. A thinner plate can wrinkle locally before the complete member loses stability.
  3. Class 1 allows plastic rotation; Class 2 reaches plastic resistance; Class 3 reaches elastic resistance; Class 4 requires effective properties.
  4. Check every relevant compression element with the supplied limits and stress distribution. The deformation shown is qualitative.

(b) Cross-section capacity — 7 printed marks

Simple explanation: The column needs more than one pass

A slice can be strong while the whole member still buckles.

The column needs more than one pass — A slice can be strong while the whole member still buckles.
Sketch, not to scale; use the original dimensions.
  1. Check cross-section compression plus bending.
  2. Then check the separate member-buckling expressions.
  3. Keep each moment, factor and resistance in its specified expression.

Remember: The three checks do not share interchangeable denominators.

Related concept and full method

At a cross section, compression and bending share the material. Use amplified moments and capped plastic resistances. The total must not exceed 1; all terms below are dimensionless.

Agpy=113×100×3451,000=3898.5kNMx,amp=1.1×75=82.5kN·mMy,amp=1.1×65=71.5kN·mMcx=min(345×12241,000,1.2×345×10961,000)=min(422.28,453.744)=422.28kN·mMcy=min(345×5751,000,1.2×345×3791,000)=min(198.375,156.906)=156.906kN·mSection interaction ratio: 6503898.5+82.5422.28+71.5156.906=0.817786Passes.

For this UC, the minor axis is governed by the 1.2pyZy cap. Using only pySy would overestimate allowable minor-axis moment. The denominator of the section axial-force term is gross squash resistance Agpy, not member compression resistance Pc.

Animation labA strong slice can belong to an unstable member3 concepts · 1 source expressions

Supplement to the original lesson. Enable JavaScript to play, step through calculations and rotate 3D models. The following explanation remains readable offline.

  1. Combine axial compression and the two bending demands using the specified section resistances.
  2. The whole member adds effective-length and buckling-curve effects.
  3. This uses its own moment factor and bending resistance; it is not a copy of the section check.
  4. Elastic, plastic and buckling resistances are not interchangeable. Read the three original expressions and their first-order/amplified moments.

(c) Member buckling — 19 printed marks

Simple explanation: Why a long column can fail before crushing

Push a long thin ruler from both ends: it may bow sideways first.

Why a long column can fail before crushing — Push a long thin ruler from both ends: it may bow sideways first.
Sketch, not to scale; use the original dimensions.
  1. Find effective length and radius of gyration for each axis.
  2. Calculate slenderness for both directions.
  3. Use the appropriate buckling curve before forming resistance.

Remember: Compare the final resistances; slenderness alone may not identify the controlling axis.

Related concept and full method

Simple explanation: A beam can escape sideways

The compressed flange can move sideways while the section twists.

A beam can escape sideways — The compressed flange can move sideways while the section twists.
Sketch, not to scale; use the original dimensions.
  1. Divide the beam at effective lateral restraints.
  2. Use each segment’s effective length to obtain its buckling resistance.
  3. Compare that resistance with the segment’s equivalent moment demand.

Remember: A section bending check alone does not check lateral-torsional buckling.

Related concept and full method

First read the factors from the two separate moment-gradient tables. The opposite-face convention makes internal β=−MbottomMtop for this clockwise-positive applied schedule.

βx=−4575=−0.600000Table 8.9: mx=0.6+0.2βx=0.480000βy=−(−39)65=0.600000Table 8.9: my=0.6+0.4βy=0.840000Table 8.4a: mLT=max(0.44,0.6+0.4βx)=0.440000

Use the major-axis end pattern for the LTB moment factor in this course solution. The separate Mᴸᵀ magnitude must remain the value specified by the paper; do not replace it with the largest amplified Mx simply because the values differ.

Table 8.7: hot-rolled H-section (UC), maximum thickness ≤40mm, about the x axis use curve b, about the y axis use curve c. Use the Data File p.8 py=345Nmm2 column. The two axes use different curves, so slenderness alone cannot identify the governing axis.

Given effective length: LEx=LEy=4000mmλx=4000112=35.714286λy=400065.5=61.068702x axis uses curve b: 35 gives 318,40 gives 310Nmm2. Interpolation fraction: 35.714286−3540−35=0.142857pc=318+0.142857×(310−318)=316.857143Nmm2y axis uses curve c: 60 gives 241,62 gives 236Nmm2. Interpolation fraction: 61.068702−6062−60=0.534351pc=241+0.534351×(236−241)=238.328244Nmm2Pcx=Apcx10=113×316.85714310=3580.485714kNPcy=113×238.32824410=2693.109160kNPc=min(Pcx,Pcy)=2693.109160kN

Member interaction uses elastic moment denominators pᵧZ, even when the cross-section check used plastic moduli. Use amplified moments here.

Mex=345×10961,000=378.12kN·mMey=345×3791,000=130.755kN·mFPc+mxMx,ampMex+myMy,ampMey=6502693.109160+0.48×82.5378.12+0.84×71.5130.755=0.805418Passes.

Continuous/non-sway member: Class 1/2 gives βW=1. Use the full u–v calculation with the stated effective length.

λ=LEry=400065.5=61.068702v=[1+0.05(λx)2]−14=[1+0.05(61.06870214.5)2]−14=0.853224λLT=uvλβW=0.85×0.853224×61.068702×1=44.289500

Read Data File p.5 Table 8.3a, pᵧ345 column:

40 gives 317,45 gives 302Nmm2. Interpolation fraction: 44.289500−4045−40=0.857900pb=317+0.857900×(302−317)=304.131499Nmm2Mb=pbSx=304.131499×12241,000=372.256955kN·m

Course Eq.8.81 uses first-order minor-axis moment in its last term. Mᴸᵀ is the specified amplified major-axis value; do not amplify it twice. The axial denominator is Pcy.

FPcy+mLTMLTMb+myMy,firstMey=6502693.109160+0.44×96372.256955+0.84×65130.755=0.772402Passes.

py=345Nmm2; Pcx=3580.486kN, Pcy=2693.109kN; Mcx=422.280kN·m, Mcy=156.906kN·m; Mb=372.257kN·m. Interaction ratios: section 0.817786, flexural buckling 0.805418, axial force/LTB 0.772402. All three requested strength checks pass.

Where the method marks probably are: the right strength and buckling curve; both slenderness values; interpolation; moment factors with the correct signs; the elastic modulus in the member checks; the uu–vv step; both interaction ratios and a conclusion. Show every one of these steps — then a small rounding difference at the end costs very little.

Animation labA strong slice can belong to an unstable member6 concepts · 16 source expressions

Supplement to the original lesson. Enable JavaScript to play, step through calculations and rotate 3D models. The following explanation remains readable offline.

  1. Combine axial compression and the two bending demands using the specified section resistances.
  2. The whole member adds effective-length and buckling-curve effects.
  3. This uses its own moment factor and bending resistance; it is not a copy of the section check.
  4. Elastic, plastic and buckling resistances are not interchangeable. Read the three original expressions and their first-order/amplified moments.

Compact exam answer

(a) Class 1, pᵧ345. (b) amplifiedMx 82.5,My 71.5 kNm. (c) mx 0.480000,my 0.840000,mLT0.440000; givenMLT96 remains unchanged.

py=345Nmm2; Pcx=3580.486kN, Pcy=2693.109kN; Mcx=422.280kN·m, Mcy=156.906kN·m; Mb=372.257kN·m. Interaction ratios: section 0.817786, flexural buckling 0.805418, axial force/LTB 0.772402. All three requested strength checks pass.

Mistakes to avoid

  • Do not apply an additionalK to the given effective height.
  • Do not use the same end-moment factor formula for reversing flexural and LTB patterns.
  • Do not amplify Mᴸᵀ twice.
  • The final LTB minor-axis term uses the course first-order My; the flexural one uses amplifiedMy.

Procedure for an unfamiliar variant

  1. Read the sign convention and exact section row.
  2. Determine strength and class.
  3. Amplify each first-order moment once, preserving a separately given amplifiedMLT.
  4. Check the capped section resistances.
  5. Find both compression resistances and the signed moment factors.
  6. Complete flexural and axial/LTB interactions separately.

Independent self-check

Try it yourself. Invented variant: all first-order actions and the supplied amplifiedMᴸᵀ increase 10% proportionally while section, effective length and amplification factors remain unchanged. What is the largest of the three new ratios?

Reveal answer and reasoning

With the same class and moment ratios, resistances/factors stay unchanged and all interaction demands scale by 1.1. The largest becomes 1.1×0.817786=0.899564. It remains below 1. Reconfirm classification after any changed axial load; the conservative web check here still covers boundedr₁.

Animation labA strong slice can belong to an unstable member2 concepts · 1 source expressions

Supplement to the original lesson. Enable JavaScript to play, step through calculations and rotate 3D models. The following explanation remains readable offline.

  1. Combine axial compression and the two bending demands using the specified section resistances.
  2. The whole member adds effective-length and buckling-curve effects.
  3. This uses its own moment factor and bending resistance; it is not a copy of the section check.
  4. Elastic, plastic and buckling resistances are not interchangeable. Read the three original expressions and their first-order/amplified moments.