CON4334 / BEGINNER EDITION

Follow the lecturer, from understanding the question
to completing the calculation yourself.

The complete English companion to the Chinese course. Lecture screenshots, foundation diagrams and step-by-step calculations explain the stages that can be difficult to follow in class.

HOW TO STUDY

New to the course? Start here.

  1. With no mechanics background, read the four pages of Foundations first: getting started → how forces travel → steel and sections → connections and stability.
  2. Look at the course map below to see which part of a building each lesson deals with.
  3. Read the eight lessons in order. Each unit opens with “What this unit is for” and “Picture it this way”; read those two lines before the lecturer’s explanation.
  4. Each worked example has its own page. Every step says why it is done, where its numbers come from and how the units convert; if a step is unclear, press “The lecturer on this part” to watch it again.
  5. Before a question of the same type, look at its design flow; for revision use the index of examples by question type.

This course follows the Hong Kong Code of Practice for the Structural Use of Steel 2011, retaining the lecturer's formulas, symbols, load combinations and table values.

Course map · How the eight lessons make one building
Loads on the floorarea load becomes a line load on the beam: Lessons 3, 4Beam: shear, moment, deflectionLessons 3, 4Does the beam buckle sidewayslateral-torsional buckling: Lessons 4, 5Connectionsbolts: Lessons 1, 2welds: Lessons 2, 3Columnsbuckling: Lesson 5with moment: Lesson 6Green arrows: the route of the force from floor to groundclass test and revision: Lessons 7, 8
A steel building is made of beams, columns and connections. The floor passes its load to the beams, the beams pass their reactions to the columns, and the columns pass them to the ground; the red circles are the connections that join the members. Each lesson deals with one part of this route.

Lecture Contents