Steelwork · Exam learning

2014–2019 · Reference answers

2019-01-08 — beam answers

All independent beam subquestions, including the required sketches and restraint variants.

Independent teaching answer, not an official solution or marking scheme. Printed marks are retained. Read the source conditions beside each result.

Identify vertical supports and lateral restraints

Units: 1 kN = 1,000 N; 1 m = 1,000 mm; 1 cm³ = 1,000 mm³; 1 cm⁴ = 10,000 mm⁴. A demand is the load effect; a resistance is what the member can carry. Compare matching units.

The triangular/roller end supports supply the vertical reactions. Intermediate lateral restraints stop sideways motion of the compression flange; they do not supply extra vertical reactions. Point-load distances below are read from the original dimension chain, measured from the left support. All plotted loads are already factored.

Given: 406 × 178 × 60 UB, S355; total span 6.8 m; full-span UDL 0.84 kN/m; point loads 50 kN at x=1.7 m, 90 kN at x=3.4 m, 40 kN at x=5.1 m.

Source: LectureNotes/CON4334-Data File-20260730.pdf · p.9, p.10

Lookup the exact 406 × 178 × 60 UB row. Read dimensions first, properties second. D = overall depth; t = web thickness; T = flange thickness; d = clear web depth. The designation is not an exact dimension.

D=406.4, t=7.9, T=12.8, d=360.4(mm)D=406.4,\ t=7.9,\ T=12.8,\ d=360.4\quad(\mathrm{mm})
b/T=6.95, d/t=45.6, Ix=21600 cm4, Zx=1063 cm3, Sx=1199 cm3b/T=6.95,\ d/t=45.6,\ I_x=21600\,\mathrm{cm^4},\ Z_x=1063\,\mathrm{cm^3},\ S_x=1199\,\mathrm{cm^3}
ry=39.7 mm,u=0.88,x=33.8r_y=39.7\,\mathrm{mm},\quad u=0.88,\quad x=33.8
Source: LectureNotes/CON4334-Data File-20260730.pdf · p.1

S355 design strength depends on the actual flange thickness. Local classification decides whether plastic bending resistance is allowed. In pure bending the web limit is different from uniform compression.

py=355 N/mm2,ϵ=275/355=0.880141p_y=355\,\mathrm{N/mm^2},\quad\epsilon=\sqrt{275/355}=0.880141
b/T=6.95,9ϵ=7.921,10ϵ=8.801,13ϵ=11.442b/T=6.95,\quad9\epsilon=7.921,\quad10\epsilon=8.801,\quad13\epsilon=11.442
d/t=45.6<80ϵ=70.411⟹Class 1d/t=45.6<80\epsilon=70.411\quad\Longrightarrow\quad\mathrm{Class}\ 1

Take the worse flange/web class. Class 1 or 2 permits the capped plastic modulus; Class 3 uses the elastic modulus.

Support reactions [3 marks]

Take moments about the left support to eliminate RA, then sum vertical forces. An applied counter-clockwise end couple contributes positively to the external moment balance and is subtracted when solving for RB.

RBL+0−wL2/2−∑Piai=0R_BL+0-wL^2/2-\sum P_ia_i=0
RB=0.84(6.8)2/2+50(1.7)+90(3.4)+40(5.1)−06.8=90.356 kNR_B=\frac{0.84(6.8)^2/2+50(1.7)+90(3.4)+40(5.1)-0}{6.8}=90.356\,\mathrm{kN}
RA=0.84(6.8)+50+90+40−90.356=95.356 kNR_A=0.84(6.8)+50+90+40-90.356=95.356\,\mathrm{kN}
RA+RB=185.712 kN=wL+∑PiR_A+R_B=185.712\,\mathrm{kN}=wL+\sum P_i
Compact exam answer — key result lines
RBL+0−wL2/2−∑Piai=0R_BL+0-wL^2/2-\sum P_ia_i=0
RB=0.84(6.8)2/2+50(1.7)+90(3.4)+40(5.1)−06.8=90.356 kNR_B=\frac{0.84(6.8)^2/2+50(1.7)+90(3.4)+40(5.1)-0}{6.8}=90.356\,\mathrm{kN}
RA=0.84(6.8)+50+90+40−90.356=95.356 kNR_A=0.84(6.8)+50+90+40-90.356=95.356\,\mathrm{kN}
RA+RB=185.712 kN=wL+∑PiR_A+R_B=185.712\,\mathrm{kN}=wL+\sum P_i

Take moments about the left support to eliminate RA, then sum vertical forces. An applied counter-clockwise end couple contributes positively to the external moment balance and is subtracted when solving for RB.

Shear-force and bending-moment diagrams [4 marks]

Cut the beam at distance x. Keep only loads to the left of the cut. A point load drops the SFD by its magnitude; the UDL gives slope −w. The BMD is the integral of shear, so it is continuous through a point force and curved under a UDL. Maximum moment can occur at a shear sign change or at a loaded/coupled boundary.

V(x)=RA−wx−∑ai<xPi(kN)V(x)=R_A-wx-\sum_{a_i<x}P_i\quad(\mathrm{kN})
M(x)=RAx−wx2/2−∑iPimax⁡(0,x−ai)(kN m)M(x)=R_Ax-wx^2/2-\sum_iP_i\max(0,x-a_i)\quad(\mathrm{kN\,m})
M(x)=95.356x−0.84x2/2−50max⁡(0,x−1.7)−90max⁡(0,x−3.4)−40max⁡(0,x−5.1)M(x)=95.356x-0.84x^2/2-50\max(0,x-1.7)-90\max(0,x-3.4)-40\max(0,x-5.1)
x (m)V just left (kN)V just right (kN)M (kN m)
095.35695.3560
1.793.92843.928160.8914
3.442.5-47.5234.3552
5.1-48.928-88.928152.3914
6.8-90.356-90.3560

At the end supports the table gives the internal beam-side value; the external SFD closes to zero after including the reaction. At an internal zero-shear point, substitute x = (RA − preceding point loads)/w when that x lies within the interval.

Calculated SFD and BMD; point-load jumps, UDL curvature and labelled ordinates.
Calculated SFD and BMD; point-load jumps, UDL curvature and labelled ordinates. Full-size image
Compact exam answer — key result lines
V(x)=RA−wx−∑ai<xPi(kN)V(x)=R_A-wx-\sum_{a_i<x}P_i\quad(\mathrm{kN})
M(x)=RAx−wx2/2−∑iPimax⁡(0,x−ai)(kN m)M(x)=R_Ax-wx^2/2-\sum_iP_i\max(0,x-a_i)\quad(\mathrm{kN\,m})
M(x)=95.356x−0.84x2/2−50max⁡(0,x−1.7)−90max⁡(0,x−3.4)−40max⁡(0,x−5.1)M(x)=95.356x-0.84x^2/2-50\max(0,x-1.7)-90\max(0,x-3.4)-40\max(0,x-5.1)

At the end supports the table gives the internal beam-side value; the external SFD closes to zero after including the reaction. At an internal zero-shear point, substitute x = (RA − preceding point loads)/w when that x lies within the interval.

LTB: restraint positions 0, 6.8 m [13 marks]

Check the segment x = 0 to 6.8 m. Its length is 6.8 m; the largest |M| occurs at x = 3.4 m.

Quarter stations: 1.7 m, 3.4 m, 5.1 m.

Source: LectureNotes/CON4334-Data File-20260730.pdf · p.3

For this restraint segment, take the absolute moments at its quarter, half and three-quarter points; divide by the largest absolute moment anywhere in the same segment. The stations belong to the segment, not necessarily to the whole beam. Apply the lower bound 0.44.

M2=160.8914,M3=234.3552,M4=152.3914,Mmax=234.3552(kN m)M_2=160.8914,\quad M_3=234.3552,\quad M_4=152.3914,\quad M_{max}=234.3552\quad(\mathrm{kN\,m})
mLT=max⁡[0.44,0.2+0.15∣160.8914∣+0.5∣234.3552∣+0.15∣152.3914∣234.3552]=0.900518m_{LT}=\max\left[0.44,0.2+\frac{0.15|160.8914|+0.5|234.3552|+0.15|152.3914|}{234.3552}\right]=0.900518

Use the stated normal-loading effective-length branch: LE equals the distance between effective lateral/torsional restraints. A restraint does not create a new vertical support. Class 1/2 gives βW = 1.

λ=LEry=680039.7=171.284635\lambda=\frac{L_E}{r_y}=\frac{6800}{39.7}=171.284635
v=[1+0.05(171.28463533.8)2]−1/4=0.813439v=\left[1+0.05\left(\frac{171.284635}{33.8}\right)^2\right]^{-1/4}=0.813439
λLT=uvλ=0.88(0.813439)(171.284635)=122.609995\lambda_{LT}=uv\lambda=0.88(0.813439)(171.284635)=122.609995
Source: LectureNotes/CON4334-Data File-20260730.pdf · p.5

Table 8.3, py = 355 N/mm² column; bracketing λLT rows 120 and 125. Interpolate in this column only.

pb=104+122.609995−120125−120(97−104)=100.346007 N/mm2p_b=104+\frac{122.609995-120}{125-120}(97-104)=100.346007\,\mathrm{N/mm^2}
Mb=pbSx/1000=100.346007(1199)/1000=120.314863 kN mM_b=p_bS_x/1000=100.346007(1199)/1000=120.314863\,\mathrm{kN\,m}
mLTMmax=0.900518(234.3552)=211.04106 kN mm_{LT}M_{max}=0.900518(234.3552)=211.04106\,\mathrm{kN\,m}
ηLT=211.04106/120.314863=1.754073\eta_{LT}=211.04106/120.314863=1.754073

FAIL

Every listed segment must pass. Do not compare the whole-beam maximum with a short segment’s capacity unless that maximum occurs in that segment.

Compact exam answer — key result lines
λLT=uvλ=0.88(0.813439)(171.284635)=122.609995\lambda_{LT}=uv\lambda=0.88(0.813439)(171.284635)=122.609995
pb=104+122.609995−120125−120(97−104)=100.346007 N/mm2p_b=104+\frac{122.609995-120}{125-120}(97-104)=100.346007\,\mathrm{N/mm^2}
Mb=pbSx/1000=100.346007(1199)/1000=120.314863 kN mM_b=p_bS_x/1000=100.346007(1199)/1000=120.314863\,\mathrm{kN\,m}
mLTMmax=0.900518(234.3552)=211.04106 kN mm_{LT}M_{max}=0.900518(234.3552)=211.04106\,\mathrm{kN\,m}
ηLT=211.04106/120.314863=1.754073\eta_{LT}=211.04106/120.314863=1.754073

Every listed segment must pass. Do not compare the whole-beam maximum with a short segment’s capacity unless that maximum occurs in that segment.

LTB: restraint positions 0, 1.7, 3.4, 5.1, 6.8 m [10 marks]

Check the segment x = 0 to 1.7 m. Its length is 1.7 m; the largest |M| occurs at x = 1.7 m.

Quarter stations: 0.425 m, 0.85 m, 1.275 m.

Source: LectureNotes/CON4334-Data File-20260730.pdf · p.3

For this restraint segment, take the absolute moments at its quarter, half and three-quarter points; divide by the largest absolute moment anywhere in the same segment. The stations belong to the segment, not necessarily to the whole beam. Apply the lower bound 0.44.

M2=40.450437,M3=80.74915,M4=120.896137,Mmax=160.8914(kN m)M_2=40.450437,\quad M_3=80.74915,\quad M_4=120.896137,\quad M_{max}=160.8914\quad(\mathrm{kN\,m})
mLT=max⁡[0.44,0.2+0.15∣40.450437∣+0.5∣80.74915∣+0.15∣120.896137∣160.8914]=0.601367m_{LT}=\max\left[0.44,0.2+\frac{0.15|40.450437|+0.5|80.74915|+0.15|120.896137|}{160.8914}\right]=0.601367

Use the stated normal-loading effective-length branch: LE equals the distance between effective lateral/torsional restraints. A restraint does not create a new vertical support. Class 1/2 gives βW = 1.

λ=LEry=170039.7=42.821159\lambda=\frac{L_E}{r_y}=\frac{1700}{39.7}=42.821159
v=[1+0.05(42.82115933.8)2]−1/4=0.980887v=\left[1+0.05\left(\frac{42.821159}{33.8}\right)^2\right]^{-1/4}=0.980887
λLT=uvλ=0.88(0.980887)(42.821159)=36.962374\lambda_{LT}=uv\lambda=0.88(0.980887)(42.821159)=36.962374
Source: LectureNotes/CON4334-Data File-20260730.pdf · p.5

Table 8.3, py = 355 N/mm² column; bracketing λLT rows 35 and 40. Interpolate in this column only.

pb=341+36.962374−3540−35(325−341)=334.720402 N/mm2p_b=341+\frac{36.962374-35}{40-35}(325-341)=334.720402\,\mathrm{N/mm^2}
Mb=pbSx/1000=334.720402(1199)/1000=401.329762 kN mM_b=p_bS_x/1000=334.720402(1199)/1000=401.329762\,\mathrm{kN\,m}
mLTMmax=0.601367(160.8914)=96.754841 kN mm_{LT}M_{max}=0.601367(160.8914)=96.754841\,\mathrm{kN\,m}
ηLT=96.754841/401.329762=0.241086\eta_{LT}=96.754841/401.329762=0.241086

PASS

Check the segment x = 1.7 to 3.4 m. Its length is 1.7 m; the largest |M| occurs at x = 3.4 m.

Quarter stations: 2.125 m, 2.55 m, 2.975 m.

Source: LectureNotes/CON4334-Data File-20260730.pdf · p.3

For this restraint segment, take the absolute moments at its quarter, half and three-quarter points; divide by the largest absolute moment anywhere in the same segment. The stations belong to the segment, not necessarily to the whole beam. Apply the lower bound 0.44.

M2=179.484938,M3=197.92675,M4=216.216837,Mmax=234.3552(kN m)M_2=179.484938,\quad M_3=197.92675,\quad M_4=216.216837,\quad M_{max}=234.3552\quad(\mathrm{kN\,m})
mLT=max⁡[0.44,0.2+0.15∣179.484938∣+0.5∣197.92675∣+0.15∣216.216837∣234.3552]=0.87555m_{LT}=\max\left[0.44,0.2+\frac{0.15|179.484938|+0.5|197.92675|+0.15|216.216837|}{234.3552}\right]=0.87555

Use the stated normal-loading effective-length branch: LE equals the distance between effective lateral/torsional restraints. A restraint does not create a new vertical support. Class 1/2 gives βW = 1.

λ=LEry=170039.7=42.821159\lambda=\frac{L_E}{r_y}=\frac{1700}{39.7}=42.821159
v=[1+0.05(42.82115933.8)2]−1/4=0.980887v=\left[1+0.05\left(\frac{42.821159}{33.8}\right)^2\right]^{-1/4}=0.980887
λLT=uvλ=0.88(0.980887)(42.821159)=36.962374\lambda_{LT}=uv\lambda=0.88(0.980887)(42.821159)=36.962374
Source: LectureNotes/CON4334-Data File-20260730.pdf · p.5

Table 8.3, py = 355 N/mm² column; bracketing λLT rows 35 and 40. Interpolate in this column only.

pb=341+36.962374−3540−35(325−341)=334.720402 N/mm2p_b=341+\frac{36.962374-35}{40-35}(325-341)=334.720402\,\mathrm{N/mm^2}
Mb=pbSx/1000=334.720402(1199)/1000=401.329762 kN mM_b=p_bS_x/1000=334.720402(1199)/1000=401.329762\,\mathrm{kN\,m}
mLTMmax=0.87555(234.3552)=205.189681 kN mm_{LT}M_{max}=0.87555(234.3552)=205.189681\,\mathrm{kN\,m}
ηLT=205.189681/401.329762=0.511275\eta_{LT}=205.189681/401.329762=0.511275

PASS

Check the segment x = 3.4 to 5.1 m. Its length is 1.7 m; the largest |M| occurs at x = 3.4 m.

Quarter stations: 3.825 m, 4.25 m, 4.675 m.

Source: LectureNotes/CON4334-Data File-20260730.pdf · p.3

For this restraint segment, take the absolute moments at its quarter, half and three-quarter points; divide by the largest absolute moment anywhere in the same segment. The stations belong to the segment, not necessarily to the whole beam. Apply the lower bound 0.44.

M2=214.091837,M3=193.67675,M4=173.109938,Mmax=234.3552(kN m)M_2=214.091837,\quad M_3=193.67675,\quad M_4=173.109938,\quad M_{max}=234.3552\quad(\mathrm{kN\,m})
mLT=max⁡[0.44,0.2+0.15∣214.091837∣+0.5∣193.67675∣+0.15∣173.109938∣234.3552]=0.861042m_{LT}=\max\left[0.44,0.2+\frac{0.15|214.091837|+0.5|193.67675|+0.15|173.109938|}{234.3552}\right]=0.861042

Use the stated normal-loading effective-length branch: LE equals the distance between effective lateral/torsional restraints. A restraint does not create a new vertical support. Class 1/2 gives βW = 1.

λ=LEry=170039.7=42.821159\lambda=\frac{L_E}{r_y}=\frac{1700}{39.7}=42.821159
v=[1+0.05(42.82115933.8)2]−1/4=0.980887v=\left[1+0.05\left(\frac{42.821159}{33.8}\right)^2\right]^{-1/4}=0.980887
λLT=uvλ=0.88(0.980887)(42.821159)=36.962374\lambda_{LT}=uv\lambda=0.88(0.980887)(42.821159)=36.962374
Source: LectureNotes/CON4334-Data File-20260730.pdf · p.5

Table 8.3, py = 355 N/mm² column; bracketing λLT rows 35 and 40. Interpolate in this column only.

pb=341+36.962374−3540−35(325−341)=334.720402 N/mm2p_b=341+\frac{36.962374-35}{40-35}(325-341)=334.720402\,\mathrm{N/mm^2}
Mb=pbSx/1000=334.720402(1199)/1000=401.329762 kN mM_b=p_bS_x/1000=334.720402(1199)/1000=401.329762\,\mathrm{kN\,m}
mLTMmax=0.861042(234.3552)=201.789681 kN mm_{LT}M_{max}=0.861042(234.3552)=201.789681\,\mathrm{kN\,m}
ηLT=201.789681/401.329762=0.502803\eta_{LT}=201.789681/401.329762=0.502803

PASS

Check the segment x = 5.1 to 6.8 m. Its length is 1.7 m; the largest |M| occurs at x = 5.1 m.

Quarter stations: 5.525 m, 5.95 m, 6.375 m.

Source: LectureNotes/CON4334-Data File-20260730.pdf · p.3

For this restraint segment, take the absolute moments at its quarter, half and three-quarter points; divide by the largest absolute moment anywhere in the same segment. The stations belong to the segment, not necessarily to the whole beam. Apply the lower bound 0.44.

M2=114.521137,M3=76.49915,M4=38.325438,Mmax=152.3914(kN m)M_2=114.521137,\quad M_3=76.49915,\quad M_4=38.325438,\quad M_{max}=152.3914\quad(\mathrm{kN\,m})
mLT=max⁡[0.44,0.2+0.15∣114.521137∣+0.5∣76.49915∣+0.15∣38.325438∣152.3914]=0.601444m_{LT}=\max\left[0.44,0.2+\frac{0.15|114.521137|+0.5|76.49915|+0.15|38.325438|}{152.3914}\right]=0.601444

Use the stated normal-loading effective-length branch: LE equals the distance between effective lateral/torsional restraints. A restraint does not create a new vertical support. Class 1/2 gives βW = 1.

λ=LEry=170039.7=42.821159\lambda=\frac{L_E}{r_y}=\frac{1700}{39.7}=42.821159
v=[1+0.05(42.82115933.8)2]−1/4=0.980887v=\left[1+0.05\left(\frac{42.821159}{33.8}\right)^2\right]^{-1/4}=0.980887
λLT=uvλ=0.88(0.980887)(42.821159)=36.962374\lambda_{LT}=uv\lambda=0.88(0.980887)(42.821159)=36.962374
Source: LectureNotes/CON4334-Data File-20260730.pdf · p.5

Table 8.3, py = 355 N/mm² column; bracketing λLT rows 35 and 40. Interpolate in this column only.

pb=341+36.962374−3540−35(325−341)=334.720402 N/mm2p_b=341+\frac{36.962374-35}{40-35}(325-341)=334.720402\,\mathrm{N/mm^2}
Mb=pbSx/1000=334.720402(1199)/1000=401.329762 kN mM_b=p_bS_x/1000=334.720402(1199)/1000=401.329762\,\mathrm{kN\,m}
mLTMmax=0.601444(152.3914)=91.654841 kN mm_{LT}M_{max}=0.601444(152.3914)=91.654841\,\mathrm{kN\,m}
ηLT=91.654841/401.329762=0.228378\eta_{LT}=91.654841/401.329762=0.228378

PASS

Every listed segment must pass. Do not compare the whole-beam maximum with a short segment’s capacity unless that maximum occurs in that segment.

Compact exam answer — key result lines
λLT=uvλ=0.88(0.980887)(42.821159)=36.962374\lambda_{LT}=uv\lambda=0.88(0.980887)(42.821159)=36.962374
pb=341+36.962374−3540−35(325−341)=334.720402 N/mm2p_b=341+\frac{36.962374-35}{40-35}(325-341)=334.720402\,\mathrm{N/mm^2}
Mb=pbSx/1000=334.720402(1199)/1000=401.329762 kN mM_b=p_bS_x/1000=334.720402(1199)/1000=401.329762\,\mathrm{kN\,m}
mLTMmax=0.601444(152.3914)=91.654841 kN mm_{LT}M_{max}=0.601444(152.3914)=91.654841\,\mathrm{kN\,m}
ηLT=91.654841/401.329762=0.228378\eta_{LT}=91.654841/401.329762=0.228378

Every listed segment must pass. Do not compare the whole-beam maximum with a short segment’s capacity unless that maximum occurs in that segment.

Reusable procedure and traps

  1. Separate ultimate resistance from imposed-load serviceability. Keep kN/m and mm-based formulas consistent.
  2. Establish the whole-beam reactions first. For each restraint segment use its own length, quarter-point moments and maximum moment.
  3. A high Mc does not prove LTB passes. Check mLT M ≤ Mb as well as the applicable section resistance.
  4. A smaller unrestrained length normally increases Mb, but its moment factor changes too; recalculate rather than scaling the old ratio.

Independent practice — invented variant

Invented variant: add a lateral brace at a quarter-span point without changing vertical supports or loads. Which calculations change?

Hint

Separate the vertical-load model from the lateral-restraint model.

Reveal answer

Reactions, SFD, BMD and vertical-load deflection remain unchanged in this ideal restraint model. Create new LTB segments, then recalculate each LE, quarter-station moments, mLT, λLT, pb and utilisation. The brace needs a stable load path and cannot be treated as a new vertical support.